Sevylor Motor Mount. One of the basics you must have. Short, compact Motor Mount will fit all Sevylor boats manufactured during the last 40 years which have been designed to accommodate a gasoline motor. Check the model of your boat and order yours today! Sevylor Motor Mount

Tired of paddling? With this mount you can use a small electric motor to propel your canoe across the lake or pond.

Model: SL40SSP3-7
SL40 Bracket, 2-Hole, Stainless Steel
Mounting brackets are used as attachment points for gas springs on hatches and other mounting surfaces where the mounting surface is not strong enough to support the direct attachment of a gas spring using a threaded stud or the angle and position of the attachment point requires the need for a mounting bracket.

STAINLESS STEEL OUTBOARD MOTOR BRACKETS have waterproof laminated mounting board with full ply at bolt holes for added strength. Large stainless steel plate 1-1/8" head elevator bolts. Husky secured stainless steel torsion springs help counterbalance motor weight. Simple four position locking bar snaps locked in either elevated or lowered position. Stainless steel guide pin slides in groove for smooth action. Unique adjustable brackets to set correct trim angle. Tough 18-8 stainless steel mounting bolts and instructions included. Positive or negative trim adjustment allows pre-setting of trim angle of motor for optimum motor performance. 71038 and 71056 are recommended also for use with motors equipped with long shafts and electric start. For motors from 7-1/2 to 20 H.P.. and maximum weight of 115#. Poly mounting board is 9-1/2"W x 10-3/4"H x 2"T. Vertical travel 11-1/4".

OUTBOARD MOTOR BRACKET is retractable, easy to use and built especially to handle newer, 4 stroke, heavier and high torque auxiliary motors in rougher water. Rated for motors up to 30 hp. and 169 lbs. 5 position lock bar, soft hypalon grip handle, black anodized aluminum, motor safety cable included. Two positive safety locks. 13" vertical travel. 2" thick, extra wide black poly mounting board.

MPN: 71033

Motor Bracket, Stainless Steel, Heavy-Duty

Easier to lift and lower - stainless springs help counterbalance motor weight. Transom mount locks and holds motor up or swings down for propulsion. Built in transom angle adjustment allows optimum motor performance. Fits all style motors - Extra Wide (11-1/2") black poly mounting board for newer wider style motor locking clamps. 4 position locking height adjustment. Stainless mounting hardware and instructions included. Wide track body for added stability. Made of tough 304 stainless steel. Mounting pad 2" thick x 11.5" wide. Designed to also accommodate the width dimensions of late model auxiliary outboard motors. No. 71033 is recommended for use with motors, 7-1/2 to 25hp up to 118lbs. Vertical travel is 11-1/4". No. 71037 is for motors up to 8hp or weight not to exceed 59lbs. With 8-1/2" of vertical travel. No. 71056 is for motors 7-1/2 to 20hp up to 115lbs. Vertical travel is 11-1/4".<br><br>STAINLESS STEEL AUXILIARY MOTOR BRACKETS.<br><p><font color=red>Price is only for Item# LJ-1892439: Motor Bracket, Stainless Steel, Heavy-Duty
The following items in the picture are not included, you can buy the following items by searching the item#:
Item# LJ-1892442: Motor Bracket, Stainless Steel
Item# LJ-1892450: Motor Bracket, Stainless Steel<br>

MPN: 71075<br><br>Motor Bracket, Adjustable + or - 7° to 35° Transoms<br><br>A Permanent fixed height mount for an auxiliary or trolling motor. 304 stainless steel brackets and hardware. 1-1/2" black poly mounting board, 8" width. For motors up to 15 horsepower. Motor weight up to 75 lbs.<br><br>STATIONARY OUTBOARD MOTOR BRACKET.<br><p><font color=red>Price is only for Item# LJ-1892482: Motor Bracket, Adjustable + or - 7° to 35° Transoms
The following items in the picture are not included, you can buy the following items by searching the item#:
Item# LJ-1892481: Motor Bracket<br>

For motors up to 12 hp only. Fits 7/8 or 1 railings. Lifetime warranty.

ALUMINUM AUXILIARY OUTBOARD MOTOR BRACKETS are retractable. For trolling or for auxiliary use on power or sailboats. Bolts to transom holding motor safely out of water. Swings down to correct position for propulsion. 2" thick waterproof laminated mounting board with full ply at bolt holes for added strength. Simple easy 4 position locking device snaps locked in either elevated or lowered position. Stainless steel guide pin slides in safety groove for positive, smooth action. Sturdy mounting brackets 5-1/4" wide x 9" high. Husky secured stainless steel double torsion springs help offset motor weight. 18-8 stainless steel bolts and instructions included. 71040 works for motors with single attaching clamp. 71041 and 71057 are recommended for motors with standard shaft length. For motors from 7-1/2 to 20 H.P.. and maximum weight of 115#. Poly mounting board is 9-1/2"W x 10-3/4"H x 2"T. Vertical travel 11-1/4".

MOTOR DISPLAY STAND is ideal for storage of most motors. Utilizes tough alloy 1" aluminum tubing and stands 32-1/2" high. Folds flat. For up to 25 H.P.. motor with maximum weight of 85#. Do not exceed weight recommendations.