These are the best boat covers available. They are suitable for storage/mooring as well as trailering. The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 'Solution died' simply means that the thread is dyed before it is woven into the material, as opposed to the fabric being woven or produced, then dyed. This process allows for better penetration of the dye, and better colorfastness. This makes the cover very resistant to fading. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonably paced trailering. This particular unit will fit a pontoon or deck boat with deck or playpen area between 21 ft and 24 ft. The length of the pontoons is not important. Rather, the length of the deck or 'playpen' area and the width of the deck or 'playpen'area. It will accomodate up to a 102" beam, which is very standard for pontoon boats of this length. This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty

These are the best boat covers available. They are suitable for storage/mooring as well as trailering. The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 'Solution died' simply means that the thread is dyed before it is woven into the material, as opposed to the fabric being woven or produced, then dyed. This process allows for better penetration of the dye, and better colorfastness. This makes the cover very resistant to fading. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonably paced trailering. This particular unit will fit a pontoon or deck boat with deck or playpen area between 25 and 28 ft. The length of the pontoons is not important. Rather, the length of the deck or 'playpen' area and the width of the deck or 'playpen'area. It will accomodate up to a 102" beam, which is very standard for pontoon boats of this length. This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty

These are the best boat covers available. They are suitable for storage/mooring as well as trailering.
The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 'Solution died' simply means that the thread is dyed before it is woven into the material, as opposed to the fabric being woven or produced, then dyed. This process allows for better penetration of the dye, and better colorfastness. This makes the cover very resistant to fading. <br><br> 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.

The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.

What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! <br><br> Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonably paced trailering.
This particular unit will fit a pontoon or deck boat with deck or playpen area between 17 ft and 20 ft. The length of the pontoons is not important. Rather, the length of the deck or 'playpen' area and the width of the deck or 'playpen'area. It will accomodate up to a 96" beam, which is very standard for pontoon boats of this length.
This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty

Protect your investment with a premium PONTOON BOAT COVER from SafeGuard. Made of heavy-duty 600 Denier marine fabric that's both waterproof and UV / mildew-resistant. Seams are double-stitch sewn using rotproof thread for years of protection, also allows for maximum breathability. Heavy duty cord sewn in the entire bottom of cover. Includes tie down straps with quick release buckles. Color is Gray. As with all of Safeguard boat cover products is a 5 year warranty!!

For moorage or storage, this strong 300D polyester pontoon cover offers incredible all-weather protection. Coated for maximum water resistance and repellency, the rugged, durable 300D polyester fabric won't shrink or stretch, resists dirt and stains and protects against mildew and U.V. damage. The convenient design provides a snug, custom-like fit with non-scratch D-rings, tie-down rope and a full elastic bottom hem. Includes 2 stern-fit elastic cords. Model A fits most 17-20' pontoons with a beam width up to 96"; model B fits most 21-24' pontoons with a beam width up to 96"; model C fits most 25-28' pontoons with a beam width up to 96".

These are the best boat covers available. They are suitable for storage/mooring as well as trailering. The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 'Solution died' simply means that the thread is dyed before it is woven into the material, as opposed to the fabric being woven or produced, then dyed. This process allows for better penetration of the dye, and better colorfastness. This makes the cover very resistant to fading. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonably paced trailering. This particular unit will fit a pontoon or deck boat with deck or playpen area between 25 and 28 ft. The length of the pontoons is not important. Rather, the length of the deck or 'playpen' area and the width of the deck or 'playpen'area. It will accomodate up to a 102" beam, which is very standard for pontoon boats of this length. This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty

These are the best boat covers available. They are suitable for storage/mooring as well as trailering. The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 'Solution died' simply means that the thread is dyed before it is woven into the material, as opposed to the fabric being woven or produced, then dyed. This process allows for better penetration of the dye, and better colorfastness. This makes the cover very resistant to fading. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonably paced trailering. This particular unit will fit a pontoon or deck boat with deck or playpen area between 21 and 24 ft. The length of the pontoons is not important. Rather, the length of the deck or 'playpen' area and the width of the deck or 'playpen'area. It will accomodate up to a 102" beam, which is very standard for pontoon boats of this length. This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty

Tough polyester Hurricane fabric won't shrink or stretch and is much stronger than ordinary cotton canvas covers. All-season boat cover is resistant to mildew and UV damage. Available in 3 sizes to fit most popular pontoon boats. Includes tie-down rope and elastic bottom cord for a tight, secure fit. Material Type: Polyester, Material Thickness (denier): 300, Elastic Bottom: Yes, Storage Bag Included: No, Tie-Downs Included: Yes, Fits Boat Style: Pontoon, Fits Beam Width (in.): 96, Fits Length (ft.): 21 - 24

Features Integrated buckle and strap system for easy fitting and traileringadjustable straps snap into quick-release buckles on the cover Storage bag and trailering straps, transom flap tie-down rope and two stern-fit elastic cords included Adjustable elastic hem cord sewn into entire bottom hem provides a tight, custom fit Dual air vents reduce inside moisture and ballooning of cover at high speeds Adjustable transom-flap for a superb fit High strength polyester StormPro 600D Marine Canvas designed for extra durability and all-weather protection Fabric coating technology and heavy-duty fabric for maximum water resistance and repellency Resistant to mildew and UV damage Won't shrink or stretch Fits most popular pontoon boat with three sizes 21 feet to 24 feet L beam width 96 inches Five year warranty

These are the best boat covers available. They are suitable for storage/mooring as well as trailering. The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 'Solution died' simply means that the thread is dyed before it is woven into the material, as opposed to the fabric being woven or produced, then dyed. This process allows for better penetration of the dye, and better colorfastness. This makes the cover very resistant to fading. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonably paced trailering. This particular unit will fit a pontoon or deck boat with deck or playpen area between 17 ft and 20 ft. The length of the pontoons is not important. Rather, the length of the deck or 'playpen' area and the width of the deck or 'playpen'area. It will accomodate up to a 96" beam, which is very standard for pontoon boats of this length. This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty