Jabsco Shower Drain and Bilge Pump - 12V SHOWER DRAIN PUMP

<b>Shower Drain System

A compact, full capacity shower drain system. Automatically turns on after the water starts, and shuts off when the water is removed. Activated by a Rule-A-Matic float switch. Three inlet ports which offer varying combinations of inlet hose. Other features include a clear screw down cover, a removable strainer for easy cleaning, and an internal check valve to prevent back flow.

JABSCO PARMAX 3 SHOWER DRAIN PUMP 12V 3.5GPM

Sold as each. 18" round x 30" deep sump pit with rolled top flange for cover. 4" molded hub w/gasket for PVC or cast iron pipe connection. Flange for cover includes eight threaded inserts to attach cover. Made of heavy duty polyethelene. Use sump cover SKU # 4095972 . Manufacturer's number: AKP30140. Buy Hardware Supplies SKU #: 4095980. Country of origin: United States. Distributed by Ak Industries,, Inc.

Transfer pump for shower and grey water. Runs dry without harm. Operated with a manual on-off switch or an automatic level control. (Switch or level control not provided.) Includes two 1/2" barb port fittings. Install Flojet strainer between shower pan and pump inlet.
20409043 Service Kit: Check valve assembly (EPDM) diaphragm & pistons (Santoprene). Ball bearing drive & cam (3) Port clips, seal & screws.

17820 Oil Changer SystemThe Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed with the integral reversing switch to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally at the end of an oil change the cover will not close unless the factory supplied valves are in the fully closed position. Product : JABSCO PERMANENT MOUNT OIL CHANGE SYSTEM REVERSIBLE Manufacturer : JABSCO Manufacturer Part No : 17820-0012 UPC : 671880529624

ITT Jabsco Par-Max 3 Shower Drain Pump 24 Volt. This ITT Jabsco pump is new generation, long life fully serviceable shower drain pump. 3.5 gpm at 3' head. Self-priming up to 10' allows mounting above wet bilges. Diaphragm desig Sold as Each

Automatically turns on after the water starts, and shuts off when the water is removed. Activated by a Rule-A-Matic float switch. Available in two pump capacities - 500 gph and 800 gph. The 500 model has one 1- 1/2 inlet port. The 800 models have three inlet ports which offer varying combinations of inlet hose. Other features include a clear screw down, cover, removable strainer for easy cleaning, and an internal check valve to prevent back siphoning.